How to Use a Zero Turn Mower in Sandy Soil (Pro Tip)
What is the appeal of zero-turn mowers for sandy soil? The solution is its easy controllability. A zero-turn mower can be maneuvered smoothly on any surface. Its zero turning radius allows you to steer the mower in any direction you want, at any time.
Controlling a zero turn mower in sandy soil, on the other hand, can be difficult. Things may go against your expectations if you are not aware of the proper method.
But don’t worry; this article will show you exactly how to use a zero-turn mower in a sandy area. Finally, you should have no trouble controlling the machine.
Table of Contents
How To Run Zero Turn Mower in Sandy Soil
A zero-turn mower effectively cuts the grass with a circular blade. Zero-turn mowers are the best for turning around corners because of their circularly rotating blades. This machine excels at making quick turns.
To reap the benefits of this mower, make certain that all of the necessary components are used. See how to run a zero turn mower in sandy soil in the video below.
Choose The Ideal Grass Clipping Option
If you’ve been mowing for a while, you’ve probably debated whether to use mulching or side discharge.
A mulcher shreds grass into small pieces, whereas a discharger sends grass flying away from the lawnmower. A mulcher is less messy than a discharger, which requires you to swipe away excess bits.
Because you will be working on sandy soil, a mulcher is the best option. This way, you won’t have as much trouble cleaning up after yourself.
Choose The Right Fuel
You have the option of using either electricity or gas. While both are equally convenient, there may be some minor differences.
Gas is the best fuel for your machine. It can maximize the performance of your mower. However, you might not want to spend the extra money on gas every now and then.
Electric lawn mowers solve this issue. Simply connect your machine to a power source and you’ll have a perfectly functioning mower at a lower cost. Because there is no risk of oil leakage ruining your lawn, this option is also ideal for sandy soils. It also reduces the possibility of jamming.
Choose The Proper Control System
You can set your mower to operate automatically or manually. However, because you will be using zero-turn mowers on sandy soil, a manual mower will most likely be more effective. You can take these machines anywhere and cover every nook and cranny with precision.
Automatic also works well. However, if you don’t have anything important to do while mowing the lawn, the manual system is always preferable.
Take Care Of The Machine
Operating a zero-turn mower on sandy soil can cause damage to the machine. Sands can become lodged in the spinning blades, impairing the device’s performance. Not only that, but the sand can also damage the internal equipment.
Fortunately, this only occurs when a large amount of sand becomes lodged in the blade. Simply clean the spinning blades after each use, and your mower should be fine.
Get The Perfect Tire Pressure
Sandy soil is a difficult terrain for all types of wheels. The tire pressure must be just right for the mower to run smoothly. Tires that are overinflated will not have enough traction to move on the sandy ground. Low tire pressure, on the other hand, will cause the wheel to dig deep into the ground.
The key here is to maintain proper tire pressure. According to Lawn Mower Guru, this pressure should be 14 PSI for the front wheels and 10 PSI for the rear tires on zero-turn mowers. Try this modification, and your mower will be ready to go.
Make Sure To Use The Right Blade
Not all blades work well with zero turn mowers, especially when operating on sandy soil. However, if you don’t have much experience, determining which one is the right blade can be difficult.
Husqvarna and Toro both make excellent blades. If you’re using mulching mowers, go with Toro 22 or Toro 20. If you must use a discharger, consider the Husqvarna Z254 R. The Husqvarna Z254 XP blade is the best option. This option works with mulching and discharger mowers.
There are many more mower blades available, but they may not be suitable for use with a zero-turn mower on sandy soil. So, instead of taking the risk, consider our recommendation.
Frequently Asked Questions (FAQs)
What are the best lawn mower blades for sand?
Low-lift blades are typically preferred for sand. This type of blade has a longer lifespan. Because of their long lifespan, they are an excellent choice for such settings.
Do low-lift blades cut better?
Low lift blades cut shorter and dry grasses more effectively. These mowers’ blade positioning and velocity make them an excellent choice for such situations. High-lift blades, on the other hand, perform admirably in all conditions. They work well because of their deeper curved edge. As a result, whether low-lift blades cut better or not is still debatable.
Are high-lift blades good for sandy soil?
High-lift blades, on the other hand, are not ideal for sandy soil. A blade turning vigorously above sandy ground causes the sand to swirl like a storm. As a result, sand easily becomes lodged in the motor of high lift blades, causing permanent damage to internal equipment.
Conclusion
Running a zero turn mower in sandy soil is not easy. There are numerous technical issues at stake here. A number of things require your undivided attention. However, once you’ve gotten all of the adjustments just right, nothing can stop you from giving your sandy lawn the perfect look. Simply keep an eye on the condition of your lawn. That should take care of everything else.
