How to Fill a Remington Chainsaw with the Correct Oil and Gas

Any fuel-related issues that arise could be traced back to the gas and oil that you used in your chainsaw.

You may save a lot of trouble with starting and running by using the appropriate gasoline and using it while it’s still fresh.

To power their 2-cycle motors, Remington chainsaws blend gas and oil at a 40:1 ratio.

  • Unleaded gas having no more than 10% ethanol and an octane rating of 89 or higher.
  • Premium 2-cycle oil that meets the standards set by ISO-L-EGD and JASO M345.

In a well-ventilated place far from flammable materials, combine the fuel and oil.

Remington Chainsaw

Before diagnosing, repairing, or operating, be sure you’ve read and understood all of the safety recommendations in the equipment’s operator’s manual.

If you are unsure of how to proceed or if you lack the necessary expertise or physical ability to complete the repair, you should seek the advice of a professional.

Mixture of Gasoline and Oil for a Two-Cycle Remington Chainsaw

Find out what kind of motor powers your chainsaw. Chainsaws with 2-cycle engines are currently produced by Remington. You need to be familiar with the chainsaw’s engine type if you’re not utilizing a popular brand.

Nowadays, 2-cycle engines are used in the vast majority of gas-powered chainsaws, although there are also 4-cycle chainsaws that call for pure gas.

In order to avoid having to replace your Remington 2-cycle chainsaw, avoid the temptation to use pure gas.

The 2-cycle engine will seize up and stop working if you use straight gas. The engine’s moving parts wouldn’t be able to function smoothly without the addition of oil to the fuel.

Remington Chainsaws Utilize 40:1 Gas-Oil Mixture.

Your Remington chainsaw has a 2-cycle engine with a single fill port that requires a 40:1 mixture of gas and oil. This equates to a ratio of 40 parts gasoline to 1 component oil.

For instance, 3.2 ounces of oil are needed to make one gallon of gasoline. To find out how much oil you should put into your unleaded gas, use this table.

Blending Gasoline and Oil1 Gal Gas2 Gal Gas2.5 Gal Gas
40:13.2 oz Oil6.4 oz Oil8.0 oz Oil

The Best Fuel for Your Remington Chainsaw

Be sure to use fresh gas in your Remington chainsaw. Old gas loses some of its flammability as it degrades.

Ethanol-blended gas is more prone to varnish buildup in the fuel system because it attracts atmospheric moisture. Once the fuel system becomes clogged with gummy deposits, the carburetor will not be able to function properly.

Your Remington chainsaw may have starting, battery, or power issues as a result.

For optimal performance, Remington chainsaws need unleaded gasoline with an octane value of 89 or higher and no more than 10% ethanol. This gasoline is available at any regular gas station. Combine this fuel with a premium 2-cycle oil.

Never fill up with E15, E30, or E85 gas, or any other type of gas with an ethanol level more than 10%. Up to 15%, 30%, and 85% ethanol can be found in these fuels. The optimal fuel is one with a low ethanol concentration or none at all.

How to Choose Chainsaw Oil for a Remington

High-quality 2-cycle air-cooled engine oil that meets the standards set by ISO-L-EGD and JASO M345 FD is necessary for Remington chainsaws.

Use a 3.2-ounce bottle of oil like the one sold by Briggs & Stratton. There is a 40:1 fuel mix that may be made by combining this with 1 gallon of gas.

The oil used in 2-cycle engines is different from that used in cars. Keep in mind that your chainsaw cannot run on regular motor oil.

2-Cycle Remington Pre-Mixed Gasoline

A suitable fuel choice is a pre-mixed fuel like TruFuel, which contains both oil and an ethanol-free fuel. Fuel that is already stored and waiting to be used is a huge time saver.

Also, you won’t have to worry about the issues that arise from using ethanol-based fuel.

Your Remington Chainsaw Needs a Fuel Stabilizer

Due to the rapid deterioration of gasoline beginning just 30 days after purchase, you should only stock up on as much as you can use in that period.

Use an additive like Sea Foam Motor Treatment or STA-BIL to keep the fuel stable and reduce moisture if you know you won’t be able to utilize it within this timeframe.

In case any of my gasoline is left sitting around for too long, I plan to add Sea Foam to it. Estimating the amount of fuel I will need can be tricky.

Mixing Gas for a Remington Chainsaw

Find out how much fuel blend you need to make. To find out how much 2-cycle oil should be added to the gas, use the table provided above.

  • Loosen the top of a legal gas container. Fill up a gas tank with unleaded fuel (at least 89 octane and no more than 10% ethanol).
  • Combine the proper amount of 2-cycle oil with the fuel (3.2 oz. oil per gal of gas).
  • Take off the lid and put back on the cap.
  • It’s best to use a gentle shaking motion to combine the fuel and oil.
  • Put more gas in the chainsaw’s tank.

You should always put a label on your gas can indicating the fuel type or oil/gas blend you’ve used. If you put the wrong fuel in your machine, it could break.

It’s possible that you’ll recall mixing fuel in a particular fuel can, but that knowledge might not transfer to anyone else.