Your Belt Keeps Coming Off Your SCAG Lawn Mower: SOLVED!
Having to continually stop to put your mower deck belt back on your mower is very frustrating. You just want to get the mowing done.
Having to continually install the belt has increased your mowing time. Finding and fixing the root cause of your SCAG belt falling off is the only thing that’s going to make it stop happening.
A SCAG mower belt may keep coming off your mower when the belt is worn or shredded; the belt keeper is bent; the spindle or pulley bearings are bad; the tension is not correct; debris has lodged itself in the deck, or the belt has become covered in rust or oil.
Remove the ignition key and the spark plug boot before you start working on your mower deck in addition to other safety procedures found in your operator’s manual.
This post may include affiliate links. Purchases made through these links may provide a commission for us, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
Follow all safety instructions provided in your equipment operator’s manual prior to diagnosing, repairing, or operating.Consult a professional if you don’t have the skills, or knowledge or are not in the condition to perform the repair safely.
Table of Contents
8 Reasons Your SCAG Lawn Mower Belt Keeps Coming Off Your Deck
Worn SCAG Deck Belt Will Cause the Belt to Come Off
Eventually, your mower deck belt will wear out. This can affect your cut because the belt slips and fails to turn your blades at a high speed. A worn belt can also become loose on the pulleys and roll off of them causing your SCAG belt to keep falling off.
Take a look at your belt and look for signs of wearing. You may notice cracks in the belt or it has become stretched. A glazed shiny appearance to the belt or one that sits deep in the pulley grooves are also signs the belt is worn and needs to be replaced.
While some mower owners try to find a comparable belt at the local hardware store, I highly advise against doing this. The belt you get at the hardware store may look the same, but it isn’t always the right type, size, or quality of the belt.
I prefer to purchase an OEM (Original Equipment Manufacturer) belt to ensure I’m getting a quality belt of the right material designed for my mower. The mower deck belt does make a difference to the quality of cut you receive from your SCAG mower.
Damaged Belt Keeper Causes a SCAG Belt to Keep Coming Off
Your SCAG may use a rod that sits between 1/8” and 1/4” away from the pulley. This is known as a belt keeper or belt guide.
The belt doesn’t actually touch these belt keepers. It is just an extra precaution to keep the belt from falling off the pulley and coming off the deck.
When the belt has slack in it, it can hit the belt keeper causing the rod to bend. This increases the chance your belt comes off your lawn tractor. Check the belt keeper and bracket.
Adjust it back into shape if it has been bent out of place. You may need to use a hammer or other tools to straighten the keeper to get it back to its original position.
If you are unable to reshape the rod or bracket and get it to sit correctly on the deck, you should replace it with a new one.
Shredded SCAG Mower Deck Belt Will Cause the Belt to Come Off
A belt can become shredded causing it to become weak and more likely to break. The most common reasons a belt will shred is from incorrect installation or from rubbing on a bracket that has moved out of place.
If you find your belt is shredding along its edges, first check to make sure you are using the right belt and it is correctly routed around your deck pulleys. You may have a decal on your mower with a diagram that shows the belt layout.
If you can’t find it, don’t worry. Refer to your SCAG owner’s manual or a parts diagram to get this information. Once you have confirmed your belt has been installed correctly, check for any brackets that your belt may be rubbing against once your mower deck is engaged.
You may find a shiny wear spot on a bracket where the belt continues to rub. Adjust any brackets you find causing your belt to rub so they no longer rub.
If the bracket you are adjusting has a bushing in it, the bushing may need to be replaced. You must replace a bracket you are unable to adjust to prevent the belt from rubbing.
Lastly, replace the mower deck belt with a new one once you have confirmed there are no more points on your mower deck the belt is rubbing against.
Bad SCAG Spindle Housing Bearing Will Cause the Belt to Come Off
A bearing may be bad in your SCAG spindle housing assembly. This is the piece on your deck where your mower blade attaches.
A failed bearing can cause your blade to wobble. At high speeds, the wobble can cause an excessive vibration that can knock the belt off your mower.
To check for a bad bearing, safely access the underside of your mower deck. Protect your hands with a good pair of work gloves and grab a hold of each end of your mower blade.
Rock the blade up and down feeling for movement. You may also hear a knocking noise. If you find your blade is secure to the cutter housing, but there is vertical movement, remove the blade and disassemble the spindle housing assembly (also known as cutter housing).
Chances are highly likely you have a bad bearing in the housing that must be replaced. Inspect the spindle for damage. Replace the bad parts and reinstall. You can purchase the complete spindle assembly or replace the bearing in the housing.
Bad SCAG Pulley Bearing Will Cause the Belt to Come Off
A bad bearing in a deck pulley can cause the belt to slip off of the pulley. This is because the pulley is designed to sit flat and parallel to the deck.
A pulley with a bad bearing will result in a pulley developing a wobble so it no longer is securely attached. It may now sit angled to the deck which increases the possibility the belt will slip from the vibration from a bad bearing.
Check each pulley by slowly spinning the pulley by hand. When you feel resistance, feel a wobble, or hear a noise coming from the bearing, the bearing is bad. The pulley must be replaced.
Insufficient Belt Tension Will Cause SCAG Belt to Come Off
Your SCAG has a tensioner bracket and spring on the mower deck to keep proper tension on the deck belt so it doesn’t come off the pulleys and fall off your deck.
Too much tension on the mower deck belt can cause damage to your deck components. Too little tension on the belt can cause the belt to vibrate, slip and come off your SCAG mower.
Debris that collects on top of your mower deck can interfere with the movement of your tensioner pulley. Check the area around the tensioner bracket and spring and make sure the tensioner, bushing, and spring is in good condition. Remove any debris restricting the tensioner from working properly.
It isn’t only important to keep the belt area of your mower deck clean and free of debris for performance reasons, it is also important for safety reasons as well. Dry debris collected on the top side of your mower deck can catch on fire from the heat of the belt.
Read more about cleaning your mower deck in my guide finding and fix mower deck problems. A clean mower will not only improve performance, but it can also extend your mower’s lifespan.
Debris Will Cause a SCAG Deck Belt to Keep Coming Off
Check your pulleys for dirt buildup in the grooves of the pulleys. When your SCAG mower deck belt has to run around a pulley with mud and debris packed in the pulleys, it is being stretched. This can cause the belt to roll off the pulleys.
The extra stress put on the belt can also cause the belt to snap. To correct this, inspect the pulleys and remove any dirt, stones, grass, and debris you find packed in the grooves of the pulleys or under the pulleys.
Oil or Rust on a SCAG Deck Belt Will Cause it to Keep Coming Off
Rust and oil can ruin a deck belt and be the reason it keeps coming off your SCAG mower. Let’s talk about oil first. The oil that gets spilled or leaks on the mower deck can lubricate the belt causing it to slip off the pulleys.
When oil sits on your belt for an extended time, the belt can swell. Look for the cause of the oil leak and repair it. Clean the oil to remove it from the deck and mower components. Replace the mower deck belt.
The other item that can get on the belt and cause it to come off your mower is rust. Rust forms when metal components are exposed to moisture.
When the rust transfers from the components to your SCAG deck belt, the belt is likely to dry out, crack and break.
Remove rust from the deck and mower deck components. Replace pulleys and components where you are unable to remove all of the rust. Install a new mower deck belt once your deck is cleaned up and free of rust.
Clean Your SCAG Mower Deck After Each Mowing & Before Storing
Going forward, once you finish mowing the lawn, take time to clean your mower removing grass clippings and dirt from your mower. These items hold moisture and can accelerate corrosion on your SCAG mower.
Ensure your mower is completely dry before placing your mower back in storage. Leaving it outside on a sunny day will help remove moisture. You can also try to speed up the process using a leaf blower. Here are a couple of blowers I like:
| Gas-Powered Blower ECHO PB-2620 | Battery-Powered Blower LB6504 |
|---|---|
 |  |
| 25.4 cc 2-stroke Engine 456 CFM Air Volume: 172 MPH Noise: 70 dB Dry Weight: 9.8 lbs | 56-Volt 5Ah Lithium-Ion Battery 650 CFM Air Volume: 180 MPH Noise: 65 dB Weight: 12 lbs |
Purchase on: | Purchase on: |
Still Experiencing Problems with Your SCAG Lawn Mower?
Own a lawn mower long enough, you’ll start running into problems with it starting, not continuing to run, smoking, leaking gas, giving a bad cut, vibrating, or another issue.
To help you save time and money, I have put together a guide to help you troubleshoot the next problem that develops on your SCAG mower.
You can find this guide at Common SCAG Lawn Mower Problems & Solutions.
If you are unsure how to perform diagnostics and repairs on your SCAG lawn mower safely, it’s best to have a professional complete the repairs.
This will help you avoid personal injury or additional damage to the mower. Your local SCAG lawn mower dealership or lawn mower repair shop will be able to help you solve your problem.
