Gasoline and Oil Fuel Blend Used by Troy-Bilt Chainsaws
Homeowners can benefit from having a chainsaw on hand for a variety of purposes, including storm cleanup, wood for the fireplace, and firewood for a backyard barbecue.
The chainsaws made by Troy-Bilt are among the best on the market because of their portability and simplicity of operation. It does require upkeep to guarantee its continued health. The appropriate fuel must be used, and it must be used before it goes bad.
Two-cycle engines from Troy-Bilt require a fuel-to-oil mixture of 40:1.
- Non-leaded gas with no less than an 89 octane rating and no more than 10% ethanol.
- ISO-L-EGD and JASO M345 FD approved 2-cycle premium oil.
Gasoline and oil should be combined in a well-ventilated place apart from any flammable materials.
Table of Contents
Chainsaw Fuel and Oil for a Two-Cycle Troy-Bilt
A chainsaw’s engine type should be known. At present, Troy-Bilt produces chainsaws powered by 2-cycle engines. Knowing the chainsaw’s engine type is essential if you’re not utilizing a chainsaw from the same manufacturer.
Today, most gas-powered chainsaws employ 2-cycle engines, although there are also 4-cycle chainsaws that run on pure gas.
Don’t destroy your Troy-Bilt 2-cycle chainsaw by putting undiluted gas in it.
A 2-cycle engine will seize up and stop working if operated on straight gas. The engine’s internal moving parts would seize up without the oil that is normally mixed with the fuel.
The optimal fuel ratio for Troy-Bilt chainsaws is 40 parts gas to 1 part oil.
Your Troy-Bilt chainsaw has a 2-cycle engine that requires a 40:1 mixture of gas and oil, which you may provide through a single fill port. This equates to a ratio of 40 parts gas to 1 component oil.
For instance, 3.2 ounces of oil are needed to make one gallon of gasoline. To find out how much oil you need add to your unleaded gas, consult this handy chart.
| Gas and Oil Blend | 1 Gal Gas | 2 Gal Gas | 2.5 Gal Gas |
|---|---|---|---|
| 40:1 | 3.2 oz Oil | 6.4 oz Oil | 8.0 oz Oil |
Proper Fuel for a Troy-Bilt Chainsaw
Be sure you use new gas in your Troy-Bilt chainsaw. Old gas loses some of its flammability as it degrades.
Ethanol-blended fuels attract atmospheric moisture, which then condenses into a varnish in the fuel delivery system. Carburetor and fuel system components will become clogged with gummy deposits, reducing their efficiency.
The outcome may be that your Troy-Bilt chainsaw won’t start, dies, or loses power.
For optimal performance, Troy-Bilt chainsaws need unleaded fuel with an octane rating of 89 or higher and no more than 10% ethanol. This gasoline is sold at most gas stations. Combine the fuel with a premium 2-cycle oil.
Never fill up with E15, E30, or E85 gasoline, or any other type of fuel with an ethanol level more than 10%. The percentage of ethanol in these fuels ranges from 15 to 30 to 85%. In order to get the maximum performance out of your vehicle, you should choose fuel with a minimal or nonexistent ethanol component.
The Best Oil for Your Troy-Bilt Chainsaw
In order to properly operate, Troy-Bilt chainsaws need to be lubricated with a high-quality 2-cycle oil that has been certified as ISO-L-EGD and JASO M345 FD compliant. The MTD two-stroke oil is reliable. It’s important to know that 2-cycle oil and motor oil are two different things. Please don’t put regular motor oil in your chainsaw.
High-quality 2-cycle oil, typically sold as a 50:1 mix oil, is available for purchase. 3.2 ounces per gallon is all that’s required.
2-Cycle Pre-Mixed Fuel for Troy-Bilt Engines
Pre-mixed fuels like TruFuel already contain an ethanol-free fuel and oil, making them convenient to just pour into the tank. Maintaining a stockpile of fuel makes getting the energy you need much simpler.
Even better, you won’t have to worry about the issues that arise when using fuel that contains ethanol.
For those who own a Troy-Bilt chainsaw, the correct way to mix gas is explained.
You need to calculate how much fuel mixture you will be making. To determine how much 2-cycle oil to put in the gas, use the table provided.
- Take the top off of a legal gas container. Fill a gas can with unleaded fuel (at least 89 octane and no more than 10% ethanol).
- Fill the gas can with the proper amount of 2-cycle oil (3.2 oz. per gallon of gas).
- Don’t forget to put the cap back on.
- You may combine the gas and oil by gently shaking them together.
- Put some more gas in the chainsaw’s tank.
Gas cans should be clearly labeled to indicate the type of fuel contained within. Accidentally using the wrong fuel in a machine might cause serious malfunctions. Although you might recall which gasoline can you used to mix petrol, it’s possible that someone else doesn’t.
